Menu option: Documentation > LLD

Make sure the General tab is selected, and then the IP Address Allocation tile.

IP address allocations are generated by AI from the device configuration information you upload. There is a network summary, and then a table showing site-specific allocations across all sites, and reserved & special purpose ranges.

The network summary shows:

Private IPV4 Pool

Public IPV4 Pool

IPV6 GUA Pool

IPV6 ULA Pool

Total Devices Analyzed

Subnets Discovered 

Site-Specific Allocations

This table beneath displays the following information, per site:

Information displayed:

Site Name - Virtual SME Site ID
Location - geographic location (where available)
IP Address Range - IPv4 address range
IPv6 GUA Range - IPv6 public-facing address range, where configured
IPv6 ULA Range - IPv6 private address range, where configured
Status
 

Reserved & Special Purpose Ranges

This table gives details of Subnet and VLAN allocations for network applications:

Information displayed:

Purpose - the type of network application or service
IPv4 Subnet - subnet for IPv4 addresses
IPv6 Subnet - subnet for IPv6 addresses, if relevant
VLAN Range - VLAN ID, if relevant
Notes - Details of the information supplied